Product Description:
Agilent N4433A 300 kHz - 20 GHz, 4ports Electronic Calibration Module 電子校正模組
主要技術規格
- 頻率範圍為 300 kHz 到 20 GHz
- 標準 3.5 mm (母) 接頭
- 具單一連線的快速全 3 或 4 埠校驗
- NIST 可溯及的準確校驗
- 減少接頭磨損
- 使用 PNA 和 ENA 系列網路分析儀來直接控制的 USB 介面
- 可靠的固態切換
- 可使用混合 3.5 mm 公接頭/母接頭選項
Key Features & Specifications
- 300 kHz to 20 GHz frequency range
- Standard 3.5 mm (f) connectors
- Fast full 3- or 4-port calibration with a single connection
- NIST traceable accurate calibrations
- Reduced connector wear
- USB interface for direct control with PNA and ENA series of network analyzers
- Reliable solid-state switching
- Mixed 3.5 mm male/female connectors option available
Description
N4433A Microwave electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy, and accurate. ECal is a precision, single-connection calibration technique for your vector network analyzer. Performing a full three- or four-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable to mechanical methods. Traditional mechanical calibrations require intensive operator interaction, which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
ECal modules are transfer standards capable of transferring the factory calibration accuracy to your network analyzer. The Keysight PNA and ENA series of network analyzers controls the N4433A module directly through a USB interface. PNA Series network analyzers require firmware revision 2.5 or higher.